DIY Chicken Feeder - Step by Step Guide and Material List

• Introduction
• Materials
• Tools
• Step-by-Step Guide
• Maintenance and Tips

Introduction

A chicken feeder is an essential tool for anyone raising chickens, as it allows the birds to access food whenever they need it. While there are many commercial chicken feeders available on the market, you can save money and customize your feeder by building one yourself. In this article, we will provide a step-by-step guide on how to build a DIY chicken feeder.

Materials

• 5-gallon plastic bucket with lid
• 2 PVC elbow joints (1/2 inch)
• 1 PVC tee joint (1/2 inch)
• 1 PVC pipe (1/2 inch, 12 inches long)
• 1 PVC pipe (1/2 inch, 3 inches long)
• Chicken feeder pan or tray
• Zip ties or wire
• Drill with 1/2 inch drill bit
• Utility knife
• Measuring tape

Tools

• Drill
• Utility knife
• Measuring tape

Step-by-Step Guide

Follow these steps to build your own DIY chicken feeder:

1. Using a drill, make a 1/2 inch hole in the center of the bucket lid.
2. Attach the PVC tee joint to the end of the 12-inch PVC pipe.
3. Attach one of the PVC elbow joints to the other end of the 12-inch PVC pipe.
4. Attach the 3-inch PVC pipe to the open end of the PVC elbow joint.
5. Attach the remaining PVC elbow joint to the end of the 3-inch PVC pipe.
6. Insert the 12-inch PVC pipe into the hole in the bucket lid.
7. Secure the PVC pipe in place with zip ties or wire.
8. Attach the chicken feeder pan or tray to the bottom of the 3-inch PVC pipe.
9. Fill the bucket with chicken feed.
10. Test the feeder to make sure it is dispensing the appropriate amount of feed.

Maintenance and Tips

To keep your DIY chicken feeder working properly, be sure to:

• Clean the feeder regularly to prevent mold and bacteria growth.
• Check the feeder daily to make sure it is dispensing enough feed for your chickens.
• Adjust the height of the feeder pan or tray to prevent waste and spillage.
• Consider adding a cover to the feeder to protect it from the elements.
• Use a sturdy and durable plastic bucket that can withstand the weight of the feed and the pecking of the chickens.

By following these simple steps and tips, you can build your own DIY chicken feeder and ensure that your chickens have access to a steady supply of food.